HTJ58 Die Casting Machine

HTJ58 lists Die Height (Min/Max) [mm]: 120/320 and Moving Platen Stroke [mm]: 210. The closed die must fit the height range, while the open position must allow ejection and removal. Include slides, fittings and the casting’s withdrawal direction in the assembly review. The platen movement field is separate from Ejecting Stroke [mm]: 60.

Dosage of fluid metal per shot (Zn) [kg] is 1.3; Effective Volume of Crucible (Zn) [kg] is 200. The shot field concerns the metal delivered in a cycle, while the crucible field concerns the bath. Include runners and overflows in the shot estimate. Injection Force [kN]: 60 and Injection Stroke [mm]: 130 provide further configuration checks.

The table gives Injection Position [mm]: 0,-50, Dia meter of shot sleeve [mm]: 50 and Ejecting Force [KN]: 50. Review the feed alignment, die connection and required release force with the proposed tool. Use a reviewed force-and-area calculation for the actual tool rather than converting that field into a general component-size allowance.

Machine Dimensions (LxWxH) [mm] is 3600x1500x2000, Machine Weight [kg] is 3500 and Motor Power [kW] is 9.5. The cell also needs room for die treatment, part removal and service access. Specify the alloy, complete shot, tool assembly, intended output and receiving operation so the equipment can be reviewed as a connected arrangement.